Welcome to visit our website!
        ZenithSolar Technology phone number

        CONTACTS

        • TEL : +86-335-8382258
        • Mobile : +86 13603359003
        • Skype : solarhope88
        • Email : solarhope@126.com
        • Addr. : Yazishan Industrial Park ,Haigang Zone, Qinhuangdao City, Hebei? Province, China
        News
        Your Position : Home > News
        Hot spot effect of thin film photovoltaic modules and Countermeasures
        pubdate : 2019-11-15 visits : 1642
          With the rapid development of science and technology, photovoltaic power generation technology has been widely used at home and abroad. Its application forms are various and its application places are widely distributed. It is mainly used in large-scale ground photovoltaic power plants, roofs of residential and commercial buildings, building photovoltaic building integration, photovoltaic street lamps, etc. In these places, buildings, trees, chimneys, dust and clouds will inevitably block solar cell components. Therefore, people are concerned about the impact of this kind of situation on the power generation efficiency of solar cells, and how to solve it?
          In practical applications, solar cells are usually connected in series or in parallel by multiple cell modules to obtain the desired voltage or current. In order to achieve high photoelectric conversion efficiency, each cell in the cell module must have similar characteristics. In the process of use, one or a group of batteries may not match, such as cracks, internal connection failure or blackout, resulting in its characteristics and overall disharmony. Under reasonable lighting conditions, the shaded photovoltaic cells in a series of branches will change from power generation units to power consumption units. The shaded photovoltaic cells not only have no contribution to the output of the modules, but also consume the power generated by other batteries. At this time, they will generate heat, which is the thermal spot effect.
        Compared with crystalline silicon, the film thickness of the amorphous silicon thin film battery module is relatively uniform on the whole module, the current matching of multiple sub cells is good, and there will be no crack or hidden crack in the crystalline silicon module. The amorphous silicon photovoltaic module made by excellent production process and strict quality control system will hardly have internal link of each sub cell in the thin film module Failure. In addition, for crystalline silicon solar cells, small occlusion can cause high power loss, resulting in high temperature of the components, which will burn the components seriously and even cause a major fire; however, the current density of amorphous silicon thin film batteries is small, and shadow occlusion will also have an impact on the thin film batteries, but the impact is much smaller than that of crystalline silicon batteries.
          In view of the hot spot effect of thin film photovoltaic products, the International Electrotechnical Commission has formulated strict certification test standards, and the products must withstand the test of hot spot effect under extremely severe conditions. After the hot spot durability test of the thin film photovoltaic module, the first step is to conduct visual inspection, and record or take photos of any crack, bubble or delamination. If serious appearance defects specified in the standard are found, such as: broken, cracked, bent, irregular or damaged external surface; any film layer in the effective working area of the module has more than 10% of the space of a battery area, visible corrosion, forming continuous bubbles or peeling layer between the edge of the module and any part of the circuit, which leads to the loss of mechanical integrity of the module If the installation or work is affected, it shall be deemed as unqualified. If there are appearance defects but they do not belong to the above serious appearance defects, such as: any film layer in the effective working area of the module has gaps and visible corrosion, the output wire has visible corrosion, etc., take photos for recording; if there is no impact on other subsequent test experiments, it is considered that the thin film photovoltaic module has passed the hot spot effect test, if there is an impact, select another one Re test the hot spot effect of the two components. In addition, the attenuation of the maximum output power of the component under the standard test conditions shall not exceed 5% before the test; the insulation resistance shall meet the same requirements of the initial test.
          The common way to solve the problem of hot spot effect is to parallel a diode on the module. Normally, this diode does not affect the normal operation of the assembly. When the battery in the module is blocked, the diode is on at this time, so as to avoid overheating damage of the covered battery.
        NEWS
        主站蜘蛛池模板: 黄床大片免费30分钟国产精品| 91精品国产福利在线观看麻豆| 欧美精品手机在线播放| 日韩精品亚洲专区在线观看| 精品久久久久久国产| 亚洲欧美日韩国产精品| 国产精品内射久久久久欢欢| avtt天堂网久久精品| 自拍偷在线精品自拍偷无码专区 | 国产精品毛片无码| 国产精品福利自产拍在线观看| 日本一区二区三区精品国产| 99久久国产综合精品网成人影院| 国产精品日本一区二区不卡视频| 亚洲一日韩欧美中文字幕欧美日韩在线精品一区二 | 国产成人AV无码精品| 99久久99久久精品免费看蜜桃| 亚洲欧美精品综合中文字幕| 久久精品国产99国产精品| 亚洲国产精品一区| 99久久国语露脸精品国产| 精品人妻中文av一区二区三区| 亚洲欧洲久久久精品| 久久精品无码一区二区三区免费| 四虎精品成人免费观看| 精品亚洲综合在线第一区| 国产精品福利自产拍在线观看| 四虎国产精品永久在线观看| 在线观看亚洲精品国产| 欧美日韩成人精品久久久免费看 | 人妻无码久久精品| 国产精品亚洲欧美大片在线看| 亚洲国产精品久久久久婷婷老年| 国产精品成人va| 99久久人妻无码精品系列蜜桃| 精品午夜福利在线观看| 色欲久久久天天天综合网精品| 香蕉依依精品视频在线播放| 麻豆精品视频在线观看| 日本午夜精品理论片A级APP发布| 久久久久无码精品国产app|